Origin	China
Model Number	4504001004

Product information竊�/p>

��/span> ASIO-4048 main technical parameter

��/span> Volume (length× width ×height):

                ·370mm×340mm ×1570mm

��/span> Weight: about 90kg ���

��/span> Power supply voltage: AC220V±10% ���

                  ·Frequency: 50HZ ~ 60 HZ

                  ·Power: 1500W

��/span> Blood pump/spare pump:

       ·Flux: 15 ~ 340ml/min (圭 6mm)

                20 ~ 460 ml/min (圭 8mm)

��/span> Double-hose pump:

    flow: 20ml/min~150ml/min

    Electric balance:weight scope:0~9kg(±0.5%)

    Heparin pump:

       ·Flux: 0.1ml/h節�/span>10ml/h(±5%)   

       ·Precise: 0.1ml/h

       ·Injector size: 20ml/30ml/50ml

                              10ml/20ml/30ml

                              (selectable)

��/span> Arterial pressure:

       ·display scope:-300mmHg節�/span>+400mmHg

                               (±10mmHg)

��/span> Venous pressure:

       ·display scope:-50mmHg節�/span>+300mmHg

                               (±10mmHg)

��/span> Dialysate flow:

       ·300ml/min節�/span>800ml/min linearity adjustable

       ·Temperature:35.0��/span>~39.0��/span>

        ·Resolving rate:0.1��/span>

       ·Conductivity:12.5mS/cm~15.5mS/cm

                            (±0.1 mS/cm)

��/span> UF flow scope: 0節�/span>1800ml/h(±30ml/cm)

                         0節�/span>4000ml/h(optional)

��/span> ISO UF flow scope:0節�/span>2000ml/h(±30ml/h)

   TMP:

       ·Scope:-100mmHg節�/span>+600mmH(±20mmHg)

��/span> Blood leakage monitor:

       ·over lml blood per liter dialysate

        (flow: 500ml/min)

��/span> Blood level monitor: ultrasonic sensor

��/span> Air bubble monitor:

       ·Infrared,response threshold value:

         Single air bubble of 200 龜 I exists when

         Blood flux is 200ml/min

��/span> Inflow pressure:0MPa節�/span>0.6MPa

��/span> Inflow temperature: 5���30��/span>

��/span> Environment temperature: 10���30��/span>,

                        ·Relative humidity≤70%

��/span> Rinse/disinfection: chemical disinfectioc

   (citric acid,peracetic acid and oxalic acid)

��/span> Hot rinse: 80��/span>

��/span> Back-up power supply: last for 51-30min

    After electric-cut.(optional) 

��/span> ASIO-4048 function

      Be applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultration,Hemofiltration, Hemodiafiltration,CRRT project.Compared with AISO-3038,touch screen was equipped and it can show Na+ and UF profiles;In addition,the functions ie.backup power supply,Kt/V,HCO3� adjustment,single needle and acetate treatment are optional.

��/span> Clinical Application 

   The same to AISO-3038,it is applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultrafiltration,Hemofiltration,Hemodiafiltration,CRRT project.

   Compared with AISO-3038,the following functions are added in AISO-4048;

   ��/span> Na+ and UF profiling:

         ·Be applicable for reducing the cases during dialysis treatment such as low/high pressure,muscle convulsion,headache,nausea,vomit ect.

   ��/span> Kt/V function:

         ·The sufficiency of dialysis can be reflected by Kt/V.

   ��/span> HCO3� adjustment function:

         ·Be applicable for serious acid toxicosis patient. Be capable to calibrate the acid toxicosis status according to patient's state of illness.

��/span> Substitution solution formula

Substitution solution collocation(Port formula)

 Concentration of substitution solution

��/span>Saline water 3000ml Na+ 143mmol/L

Gluconic acid Calcium(10%) 35ml  CL- 112mmol/L

Magnesium Sulfate(25%)  3.2ml HCO- 34.8mmol/L

Potassium chloride(10%) 8ml  Ca2+ 1.95mmol/L

��/span>5%Glucose    1000ml Mg2+  0.5mmol/L

Potassium chloride(10%)  2ml Glucose 65mmol/L

��/span>5%Sodium bicarbonate  250ml K 3.3mmol/L